Analysis of the reasons for the left and right movement of the UV flatbed trolley
In the daily application of the UV tablet, it is inevitable that some minor faults will occur. For example, after the UV tablet is turned on, the car runs at high speed on both sides. What is the reason for this? How should we deal with it? Let's briefly analyze the reasons below:
1: Check the raster decoder. In the case that the grating decoder is damaged, the trolley may move the vehicle to the left or right because the printing position cannot be accurately read;
2: During the use of the uv printer, the collision of the car due to operational errors may also cause this to happen;
3: The car board is faulty or the car line is not plugged in;
4: Check whether the board is damaged or not. If it is checked that the fault has been damaged, please contact the manufacturer's technical personnel for the replacement of the main board.
The above is the reason why the UV flatbed car runs at high speed on both sides. It is recommended that you standardize your own operation procedures in daily use and do routine maintenance and inspections, and find problems in a timely manner, which not only ensures our work efficiency, but also guarantees the service life of UV flatbeds.
