In the daily operation, the photo machine sometimes encounters the situation of burning the nozzle. In order to ensure the efficiency of the photo machine, let's analyze the reason why the photo machine is burning and how to avoid it:
1: The protection nozzle is mainly the choice of the machine ground wire, and the ground wire must be connected;
The best way to connect is to connect the machine to the computer, and connect the computer to the machine. The line is preferably a copper wire of more than four squares. In addition, it is necessary to observe the contact position of the nozzle and the contact tape to see if there is ink penetration. It is best to take out the nozzle and look at it. The ink of the nozzle is too much to be easily inked. Too little to do, preferably 25 to 30 ml.
2: The quality of the nozzle and ink is the main reason, followed by whether the voltage is stable, and the maintenance work should be done normally:
1 Each switch must have a certain time interval, preferably after 5 minutes;
2 It is best to turn off the operation when changing the nozzle. It is guaranteed that there is 20ml of ink in the nozzle, and it is better to use a syringe for the new nozzle to inject ink. Push the ink gently, or use a syringe to suck, then use a manual ink extractor to draw a little ink, use a paper towel to gently clean the ink, and then infusion and full color test;
3 The ink tube must be unobstructed, cannot be folded, and cannot have air. The ink in the ink cartridge connected to the ink tube cannot exceed 2/3 of the ink cartridge;
4 must use a manual ink extractor to draw ink;
5 Apply color per day before work, then test the print with 100% color and then map.
