Photo Machine equipment In the course of work failure is inevitable, printing when garbled, long spray, image deformation, shadow and so on. How should these problems be solved?
Operators should also learn some simple knowledge of the photo machine on a daily basis. The above problems can be checked in turn whether the grating decoder red light is emitted, whether there is dust or other items on the grating, affecting the grating decoder to read the grating data, the nozzle to the nozzle plate data cable is loose or incorrectly plugged, the nozzle plate is damaged;
the nozzle drive plate/IO interface plate is damaged; the printing material is damp ;
whether the bidirectional correction parameters have been changed; whether the data cable interface is USB2.0 and the interface is the rear USB port of the chassis;
3 31P thin film lines from the nozzle drive plate to the nozzle plate are not plugged in, or damaged; and whether the print management system is turned on when printing.
In fact, most of the reasons are usually not pay attention to maintenance, so photo machine maintenance can not be taken lightly. So as not to cause unnecessary loss and damage to the benefits.
