Locor Printer Print Head Replace/Maintenance Tips
For the user of the photo machine, the damage of the piezoelectric nozzle can really be a big loss, because the nozzle is one of the important parts of the photo machine, its price is also higher, especially in recent years by the impact of Epson encryption nozzle, domestic photo machine in the cost and price are greatly increased.
If due to improper operation of the photo machine or other related reasons caused by the damage of the nozzle, for the user, the loss is not only the price of the nozzle, but affect the operation of the photo machine, advertising image drawing work and so on, directly with the relevant business impact. In order to reduce the impact of photo machine nozzle damage, in the photo machine nozzle replacement should pay attention to the following problems:
If the photo machine to replace the new nozzle, first of all to check the photo machine, to see if the photo machine connected to the nozzle related lines have problems, to avoid because of the photo machine related voltage circuit, Related motherboard board and other faults caused damage to the nozzle, if in the unknown situation to reconnect the new nozzle, may cause damage to the new nozzle, so the loss is greater, so, before the replacement need to check the relevant board and connection line. In addition, the photo machine using the environment connected to the power supply voltage is also very critical, often due to the connection of the power supply voltage instability caused by nozzle damage is also very common, in this, Le color photo machine manufacturers recommend that users buy UPS power regulator, and photo machine connection use, to provide a stable supply voltage.
In addition, the serious damage of the piezoelectric nozzle, the general domestic technology is difficult to repair the nozzle. Here is a brief description of the ordinary simple nozzle maintenance. such as nozzle hard blockage plug fault, etc., in the case of nozzle plugging, often many users will remove the nozzle cleaning and soaking, etc., after completing this series of operations on the nozzle to re-install, in the nozzle cleaning at the same time, it is recommended that users to the photo machine to the ink management cleaning, combing clean, Do not let the previously existing impurities into the nozzle again, so quickly and easily lead to the plug. When the nozzle soaking and other cleaning, the cleaning solution should not be too much, do not exceed the nozzle under the metal cover plate. Otherwise it is easy to cause the nozzle circuit into the cleaning liquid burning nozzle. Be sure to blow dry the plug before installing the machine, otherwise the opportunity is easy to burn the nozzle.
