Reasons and solutions for insufficient print length of the photo machine
Photo machine in the working process length is not enough, do not know how to solve. In fact, most of the photo machine, will more or less appear similar faults. Le color photo machine manufacturers warm reminder, do not panic, in fact, the problem is very simple, understand the cause of the problem, find a solution on it.
Print lengths are not sufficient and are generally caused by the following three reasons:
First, the photo machine to take paper system problems or the bracket speed is too fast or too slow caused
Second, the motherboard calibration settings are not saved;
Third, the outer diameter of the walking paper wheel is greater than 64.3CM or less than 64.3CM.
Regulatory Solutions:
We usually think that if you print a meter of pictures, error 0.5 is normal phenomenon, greater than 0.5 even if the length is not enough, may be the longitudinal axis is not allowed, the solution is simple: Open the "accessibility menu"-> "Color Calibration Menu"-> "Drawing longitudinal axis test", that is, on the paper starting end to start the paper, print out two T "type icon, use the ruler to measure the distance between the intersection, change the value to the measured result to save and select the saved option can be. The system default parameter is 83.82cm. If it cannot be solved, the following approach can be taken: the Bracket speed value can be adjusted to the best state, you can hit the T-type calibration, that is, 83.82cm, the longitudinal axis test, the actual value of surveying and mapping to replace the original value of 83.82cm; The outer diameter of the walking paper wheel should be 64.3cm, if the big will go long, if the small walk short.
