Nowadays, piezoelectric photo printers and inkjet printers are becoming more and more popular in the advertising inkjet industry. However, because inkjet is relatively "squeezing" and its usage is "very particular", it is necessary to make it work efficiently for itself. You must master some of these operations. Here are a few ways to save ink.
1, try to concentrate on printing
When using a piezo photo machine or inkjet printer, the worst thing is to print it every few minutes. If you need to print a lot of things, I suggest that you put the things you need to print together for printing. Because the machine cleans the print head and initializes the printer every time it is started, it fills the ink delivery system. This process wastes a lot of ink, so try not to start the machine frequently.
2, properly clean the print head
Most inkjet printing devices automatically clean the printhead when turned on, and have buttons to clean the printhead. If the automatic cleaning function of the device is invalid, the print head can be manually cleaned. For布料 cleaning, lenses should be removedland as described in the风机. Manually clean the print head by inserting a thin rubber tube at the front end of the medical injector, and rinsing it with rigorously filtered water. When rinsing, carefully observe the spray hole with a magnifying glass. If there is any residue on the side of the spray hole, it can be removed with a soft rubber product. The integrated print head that has been left unused for a long time blocks the nozzle hole due to dry ink, and can be washed with hot water before cleaning. Pay attention to the following points when cleaning the print head: A. Do not use sharp objects to clean the nozzles, do not hit the nozzles, do not touch the nozzles by hand; B. Do not disassemble or install the nozzles under the charged state, do not touch the nozzles with your hands or other objects. Electrical contacts; C. The nozzles cannot be removed from the printer and placed separately. Do not place the nozzles in a dusty place.
3, do not replace the cartridge immediately
We know that the photo inkjet device detects the amount of ink in the ink cartridge by using an inductive sensor. The sensor prompts to replace the ink cartridge as long as it detects that the ink amount of one of the inks is less than the value set in the printer. At this point, we can remove the ink cartridge to reset the internal sensor of the printer to determine the installation of a new ink cartridge.
4, try to reduce the number of cleaning
In the process of using the device, the inkjet head is often clogged, causing many reasons, such as the working environment of the machine, the quality of the ink, the idle time of the machine, etc., because each time the inkjet head is cleaned, a large amount of ink is consumed, so The number of times the inkjet head is cleaned should be minimized. Of course, when using the machine, care should be taken to use the ink of the specified model of the machine manufacturer.
