How to solve the problem of piezoelectric photo machine printing pictures
The picture printed by the piezo photo machine is frustrating for many users. What is the cause of this phenomenon? How to solve it? In fact, in the process of using the photo machine for a long time, some people will encounter some large and small faults. In the face of these faults, the first thing to do is to find out the cause and then solve the problem in a targeted manner. Usually, the photo machine is mainly caused by the following reasons.
1. Inferior ink is used. In this case, it is difficult to print a perfect picture even if the printed picture is not blurred. Therefore, it is recommended to use the ink produced by the original manufacturer of the photo machine.
2. The photo machine caused by the nozzle clogging is blurred, and the nozzle needs to be cleaned at this time.
3, the working environment temperature change is also a common factor causing the photo machine to blur, so it is necessary to provide a suitable working environment for the photo machine to avoid the working environment temperature is too high or too low.
4. The viscosity of the ink has changed. The viscosity of the ink should be adjusted before the photo machine prints.
5. If the ink in the ink tube or the ink cartridge generates air bubbles, it is easy to cause the drawing to be abnormal, so pay attention to the observation and stop printing immediately if an abnormality is found.
