The uv tablet is easy to operate, but for those who have just touched the uv flatbed printer, there will still be more or less problems. If you print the image quality, you will get a mistake. How to solve it?
In the printing production of uv flatbed, the image quality is wrong due to the failure of the nozzle, the placement of the medium and the adjustment of the height, mainly due to the ink drop or ink leakage of the nozzle, or the nozzle is too close to the material medium, causing the nozzle to wipe the surface of the medium. Damage picture quality. The printed material must be placed flat, which is much better for devices with suction devices. Of course, there is another reason why the printed material is too transparent or too thick. At this time, you need to reload the printing material to ensure that the surface is flat, and also to replace the opaque printing material. There are occasional drops of ink during the printing of the uv tablet. This is usually because the filter in the air filter on the sub-tank is wet, resulting in poor ventilation.
This may also be caused by fine hair and dust such as the uv tablet nozzle. The ink that is ejected will automatically drip when the dirt accumulates to a certain extent. To solve such problems, it is necessary to replace the air filter. At the same time, it is necessary to clean the nozzle with a special cleaning solution. A detailed inspection of the two edges of the light box cloth is required to see if there are any extra burrs. If there are burrs, It is simply processed with a lighter.
After the uv flatbed printer transmits the print data, its indicator light will keep flashing. Even if the start button is pressed, the uv flatbed printer will still not print. This is also a common print production failure that is difficult for an inexperienced operator to handle.
It should be noted that if the uv flatbed printer performs an incorrect termination of the printing operation during the printing process, even if the printing job is stopped, some residual print data will be transferred to the uv flatbed printer, and the memory remains in the memory. These print data, but in the uv tablet printer, these data are invalid, the printing work can not be achieved, and it will cause the subsequent printing work to not work properly.
I hope that the above can help you. If you still have technical difficulties, please consult professional and technical personnel to avoid other problems.
