What kind of computer does the piezo photo machine need?
Piezoelectric photo machine is already a very common printing device in the advertising inkjet industry. The use of the printout of the photo machine needs to be connected, typeset, set, etc. through the computer. What kind of computer is needed for the use of the domestic piezoelectric photo machine? The configuration can be? What are the requirements for the configuration of the computer?
Today, the rapid development of the Internet, ordinary office computer replacement is also very fast, from single-core to dual-core processors, to quad-core or even eight-core processors, hardware is constantly moving to a higher core. At the same time, with the use requirements of the operating system and related applications, the computer hardware configuration needs to be higher and higher, and the running speed is also faster.
For the use of piezoelectric photo machine, in fact, ordinary daily office computers can meet their use requirements, such as dual-core CPU, 1GB to 2GB of memory, 250G hard drive, integrated graphics or discrete graphics, motherboard provides 2 Up to 4 or so USB ports, the wired network card interface is fine, and no special interfaces and configurations (such as print serial ports) are required.
Many older printers use a serial cable to connect to the photo machine. Due to the slow transmission speed of the interface, the installation requires cumbersome drivers. The backwardness of technology and the trouble of operation, slowly, many computers have also eliminated these interfaces, and now the new generation of computer motherboards are not equipped with these interfaces, using USB or other interfaces for transmission. In particular, the USB interface supports hot plugging, plug and play, and the transfer speed is fast.
As mentioned above, although the computer configuration required for the piezoelectric photo machine is not high, in order to make the computer operate more smoothly, if the conditions permit, you can purchase a computer with a high configuration, because for the design company or the advertising production shop, The processing and design of the image image is required. These design softwares require high configuration, which makes the operation smoother. It is recommended to have a high-profile computer configuration, such as I3 processor, 4G memory, 1GB single graphics card, hard disk, 500G or more capacity, motherboard with big brands, such as ASUS or Gigabyte, etc. Guarantee. Moreover, today's PC hardware is not expensive, a set of computer configuration is probably about 3,000 yuan. However, the configuration of these hardwares can better support the daily layout and printout requirements of the photo machine.
For example, some devices use a network port network connection, and the integrated network card interface of the motherboard can fully meet the usage requirements. If you want the computer to connect to the photo machine and access the Internet at the same time, you can install a dual network card for the computer, one for the Internet and one for the Internet. Photo machine print connection, Internet and print output are correct. In addition, it should be noted that please do not use the USB interface external network card, because the USB external network card transmission will have problems, it will cause the computer montage to send a big data print when the printer prints a problem.
