Inkjet application of photo machine personalized car stickers
The application industry of photo machines is very extensive, and car stickers are more commonly used in the automotive industry. The outdoor car sticker printing is a very good propaganda media, cost-effective, and the coverage of the crowd is also very wide, can achieve a good publicity effect, is also recommended by many inkjet printing advertising companies today, it is high With the application of the performance piezoelectric photo machine, the operation is simple, the color is realistic, and the construction is convenient. Zhengzhou Lecai piezoelectric photo machine print car stickers are very clear, realistic, rich in color, durable, and will not fade, can give you a good effect, so users can rest assured to use.
Then Zhengzhou Lecai will share some tips on how to use the photo printer to print car stickers:
The reason and solution for the phenomenon that the car is stuck in the inkjet printing process of the photo machine will be easy to appear:
The car stickers on the market are uneven, the quality is different, and there are various problems, which often make us feel overwhelmed and passive. The phenomenon of arching when the photo machine is printed on the car sticker is mainly caused by the following reasons:
1. The sensitivity of the car sticker to the moisture. The base paper of single-sided PE, if the product storage environment is too different from the printing operation environment, it will easily absorb water or lose water, which will cause the bottom paper to arch when printing.
2. The car sticker product stays on the heated photo machine for too long, and the temperature setting in the product printing process is too high, resulting in inconsistent expansion rate of the base paper and the mask. And the tension system when the photo machine is printed is not adjusted, which is easy to cause arching problems when printing.
The solution is: please remove the car sticker from the low temperature and place it in the printing operation environment for more than 24 hours, so that the car sticker can be in a stable state before the inkjet operation is performed. The optimal printing temperature is the temperature of the PVC film surface at 35 °C ~ 40 °C. Conditional users can pre-heat the product and then turn on the heating system to effectively avoid this phenomenon, adjust the tension system of the inkjet printer, and control the tension of the unwinding. Of course, the use of high-quality removable body stickers can effectively avoid the above phenomenon.
