How to Solve Noise Problem for Eco Solvent Printers
The piezoelectric photo machine has noise or regular clicks while the printer nozzle is running, and there are stripes on the screen with longitudinal rules and shades of spacing.
Cause: The head bearing is misplaced, worn, or the surface is not clean. Treatment: Correct the head bearing dislocation situation, if there is wear need to be replaced in a timely manner, if the surface is not clean can be wiped clean without water alcohol, and clean the head bearing running beams. During the printing process, the screen often suddenly missing the line (the nozzle suddenly does not inkjet).
Cause: Normal printing signal is subject to electrostatic interference. Treatment: Check the grounding of piezoelectric photo machine, nozzle and power supply to ensure good grounding. The printing suddenly stops during the inkjet process.
Cause: 1. Computer malfunction
2. The print cable is loose or shedding
. Processing:
1. Perform routine operations such as computer virus detection, reloading systems and software, and may check for computer hardware failures.
2. Check the connection of the print cable. The liquid level in the secondary ink tank drops, but no ink is added to the secondary ink tank. Processing:
1. If the ink supply system is working properly, please check whether the ink in the main ink tank has been exhausted, and whether ink supply pipe breakage, accidental bending, internal blockage, loosening of the connection, etc.
2. If the ink supply system does not work, please contact your device vendor as soon as possible.
