The ink supply mode of domestic photo machine is not all uniform, but most of the use is now for continuous ink supply system. Then as a photo machine needs to be maintained, and this continuous ink supply system should also be well maintained, in order to truly ensure the printing quality of the photo machine.
1, no matter what the ink supply mode, for the ink tube is a key maintenance object, even the supply system is no exception. In order to ensure the normal ink supply, we need to check the ink cartridge inside and outside ink cartridges, ink tubes and external ink cartridges air filter, to avoid ink tube into the air or blockage. If there is a blockage, the syringe needle can be cleared at the outlet, and if there is air, the air may also be extracted according to this method.
2, sometimes there will be some foam in the ink cartridge, to go can not underestimate these bubbles, these bubbles can cause the photo machine printing disconnection, lack of color and other problems. At this point, we need to eliminate the foam in order to use it normally, and the specific operation can be done with syringes. First remove the inner ink cartridge, use the syringe to extract the ink from the ink cartridge, remember that at this time can not be too eager to pull out, to slowly pull out. The process is that the ink from the outer cartridge flows into the inner cartridge, and the ink in the inner cartridge enters the syringe. When the syringe tube has been filled with ink and the ink in the tube, such as the outer cartridge, is repeated in the process until there is no foam in the ink. Even supply system for the photo machine is also an important part, in the usual maintenance of the photo machine, remember to do all aspects of maintenance, in order to ensure that the photo machine has a longer life!
