Eco Solvent Printer Maintain Tips for First Time Use After Long Holiday
After Long vacation, photo machine and UV tablet machine first boot should pay attention to what?
Photo Machine reboot Considerations:
1: The machine is re-placed, if there is a cover related dust cover, you can first remove, clean the machine surface related debris, dust, etc., check the machine has no other appearance of the problem.
2: After checking the relevant appearance of the machine, install the relevant nozzle, ink cartridge, connect the ink pipe, if there is no ink re-add ink, check the relevant ink supply line, related ink cartridge switch and so on.
3: Check the machine power plug, data cable and other wire is intact, the machine connected wires are plugged in, the machine and the computer reconnect, and the machine connected to the power supply, restart the machine, boot for self-inspection.
4: After the post, display and so on are displayed normally, the photo machine for testing and printing, printing test strips, check the nozzle printing status is normal, whether the normal ink, there is no plug, test printing lines are good! If the printing is not normal ink, you can operate on the machine cleaning, serious nozzle plug, you can use manual ink to clean the nozzle.
5: Turn on the computer, open the relevant online application, check whether the driver and online are normal, Montay and other software startup is normal, carefully check, to ensure normal use with the computer online. UV Tablet printer Restart considerations
1. Check the rails for lubricating oil before using the UV tablet printer every day.
2. Check every day whether the nozzle ink sac is properly connected to the nozzle.
3. Check that the grating bar is clean every day.
4. Print the status test bar after booting every day: print the test bar by controlling the software. Test strips are used to detect whether the nozzle is clogged, and each of its small short lines corresponds to a spray hole, the missing short term is called "broken Needle", Fuzzy called "Virtual needle", the appearance of "Broken Needle" and "virtual needle" situation, to be cleaned.
5. Before printing, check that the material is placed properly to avoid bruising the printhead in the print.
6. Before and after each printing, print the test strip, check the nozzle status and clean it in time.
7. Please use the UV tablet printer after professional training, otherwise it will cause unforeseen problems.
8. Check the UV flat-panel printer every day, whether there is ink at the bottom of the UV curing lamp, if you have to wipe it with alcohol, and clean it regularly.
9. Check the flat line of the connecting nozzle every day for ink and pay attention to clean up in time (if the ink has flowed in or corroded the flat line, please replace it before using the machine). Is normal, you can turn on your normal inkjet printout. If you encounter problems, please contact us in time to maintain technical personnel, timely guidance to solve!
