How can I better protect the photo machine nozzle?
First of all, the photo machine is installed in a clean and dust-less environment to use. The use of the environment is very important, to dust less, moderate temperature, and to maintain the right humidity.
Secondly, the photo machine correct installation and commissioning, especially the grounding to be reliable, can not casually receive the ground line to the window frame and other places perfunctory, because the long-term accumulation of static electricity will be damaging to the nozzle.
Third, to choose qualified ink, ink pigment if round uniform particles, particle size should be less than 0.2 microns.
IV, we should do a good job in daily maintenance. Before turning on the nozzle to clean a few times, check the nozzle work normally before starting the inkjet operation. When confirming that the inkjet operation is complete, clean the nozzle, and then the nozzle moisturizing, the method is: first with a special cleaning solution to clean the moisturizing sponge, and then pour the cleaning liquid on the sponge to make it soaked. The nose is then moved back to the cleaning station and the nozzle is tightly integrated with the moisturizing sponge, and this condition is maintained so that the device stays overnight.
V, although you use ultrasonic ink supply, there may still be a blockage phenomenon (although very rare), then you have to immediately suspend the inkjet operation, and then use a vacuum cleaner suction nozzle to spray the ink from the nozzle for nozzle cleaning. Confirm the dredge before you can continue the inkjet operation.
