How to maintain your piezoelectric photo machine in rainy and humid weather
In the working environment of the piezoelectric photo machine, the influence of the rainy and humid weather on the use of the photo machine and the spray painting can not be taken care of. The following is a note for the users to share the use of the wet weather photo machine, you can refer to the following.
The spring and autumn seasons are mainly wet and rainy. In this environment, the normal use of photo machines or other related electronic products is very large, such as the related electronic components of the photo machine, the operation, the consumables, the media, and the printout. The image image drying speed is affected.
First, the use of the photo machine should pay attention to moisture
For example, the main body of the main body of the photo machine should be covered to prevent the air from being wet and cause short circuit of the relevant circuit board and components. (If the resurgence lasts for a long time, the photo machine should be turned off as little as possible, and keep it turned on. At the same time, be careful to use the relevant hair dryer to blow off the circuit board before starting the machine. You can use warm air to blow, but the humidity should not be too high.) Close the doors and windows to avoid letting the outside humid air enter the room. If the air conditioner is installed in the photo machine workspace, you can turn on the air conditioner to dehumidify. In addition, if the floor returns to the tide, it is generally difficult to completely dehumidify. It is recommended that you can spread some newspapers, discarded books, carton paper and other water on the ground, so that it can absorb water and dehumidify, and can also be non-slip.
Second, after the printout, the image screen is dry on the medium.
"Back to the South" air humidity is large, the color of the photo picture is dry and slow, especially the large-scale color picture such as red and black, it takes a long time to completely dry. The user can use a hair dryer, a machine heating dryer, etc. for local heating to speed up the rapid drying of the image, but pay attention to the hair dryer should not face the image of the dry image.
Third, printing paper media material storage should pay attention to moisture
The use and storage of photo machine materials should pay attention to moisture protection. Many users usually do not pay attention to the storage of materials, and often stack them at random, especially in the southern region, which will contain a lot of water in the air, on the ground and on the walls. However, the photo material is mainly composed of a coating on paper and paper. The paper and the coating are very sensitive to moisture and damp. The wet photo material is very likely to cause the ink to spread out, which is what we usually say. The ink is scattered, and the printed image will be clear with scattered small edges. Therefore, for the storage of photo materials, please pay attention to the original packaging after each use, placed on a special shelf in a suspended manner, do not touch the ground and the wall, which can effectively prevent the media from being affected by moisture.
The above three points of attention, in the humid climate environment must pay attention to the use of photo machine, I hope to help everyone, let your photo machine use more worry-free.
